Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: TVSdiodeDescription: Diode Zener Triple Bidirectional 7V 5% 200mW 6Pin SOT-363 T/R691510+$0.843850+$0.8000100+$0.7688300+$0.7500500+$0.73131000+$0.71252500+$0.68445000+$0.6781 -
![]()
Category: TVSdiodeDescription: BOURNS TBU-CA085-050-WH Surge protector, TBU-CA series, data cable, 850 V201810+$6.5928100+$6.2632500+$6.04341000+$6.03242000+$5.98855000+$5.93357500+$5.889610000+$5.8676 -
![]()
Category: Bipolar transistorDescription: Bipolar Transistor - Pre biased NPN Digital Transitor w/built in resistors868520+$0.126950+$0.1175100+$0.1128300+$0.1090500+$0.10621000+$0.10435000+$0.102510000+$0.1006 -
![]()
Category: Bipolar transistorDescription: Bipolar pre bias/digital transistor, single NPN, 50 V, 100 mA, 10 Kohm308920+$0.087850+$0.0813100+$0.0780300+$0.0754500+$0.07351000+$0.07225000+$0.070910000+$0.0696 -
![]()
Category: Bipolar transistorDescription: Bipolar pre bias/digital transistor, single NPN, 50 V, 100 mA, 10 Kohm, 47 Kohm, 0.2 resistance ratio858820+$0.078350+$0.0725100+$0.0696300+$0.0673500+$0.06551000+$0.06445000+$0.063210000+$0.0621 -
![]()
Category: Bipolar transistorDescription: 1NPN pre biased 100mA 50V726020+$0.108050+$0.1000100+$0.0960300+$0.0928500+$0.09041000+$0.08885000+$0.087210000+$0.0856 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C ### note Maximum voltage shown is peak impulse voltage withstand with a duration of no more than 10ms. ### Recognized UL E315805 Surface Mount Technology (Fuse) Surface Mount Technology * * Resettable Fuse * * is used to prevent damage to electrical and electronic circuits caused by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications160010+$7.1508100+$6.7933500+$6.55491000+$6.54302000+$6.49535000+$6.43577500+$6.388010000+$6.3642 -
![]()
Category: TVSdiodeDescription: Bourns TBU-CA The series TBU high-speed protector Bourns transient blocking unit (TBU) electronic current limiter (ECL) is a circuit protection device triggered by overvoltage or overcurrent, designed as the best circuit protection solution, and can be used in industrial control, medical electronic equipment, automation testing systems, as well as military and aerospace applications. They are low capacitance, unidirectional and bidirectional high-speed resettable devices that can protect against faults caused by short circuits, AC power intersections, inductance, and lightning surges within rated limits. Special features include a wide range of trigger currents and ultra fast overcurrent protection within a voltage range, as well as reduced external dimensions to save board space. This TBU can be used for protection on Ethernet, RS-485, HART, and other ports that may experience dangerous surges and power crossover events. It can also be used in telecommunications applications, providing a barrier against surges while allowing high-frequency signals (such as VDSL2) to pass through without damaging the circuit. For sensitive electronic applications, this TBU does not require large shunt protection devices and can prevent damaging currents from reaching the protected circuit in less than 1 millisecond. This TBU can significantly reduce the allowable energy and provide overshoot protection, thereby reducing stress on the printed circuit board to improve reliability and extend product life. Bourns TBU protection technology limits the energy allowed to enter sensitive electrons without loading capacitors onto high data rate lines. This allows designers to place high-performance protection even in the highest bandwidth applications. Advanced circuit protection, overcurrent and overvoltage protection block surge up to rated limits, high-speed performance, small SMT packaging, operating temperature range -40 ° C to+125 ° C, storage temperature range -65 ° C to+150 ° C, maximum contact temperature+125 ° C ESD: IEC 61000-4-289710+$8.5368100+$8.1100500+$7.82541000+$7.81122000+$7.75435000+$7.68317500+$7.626210000+$7.5978 -
![]()
Category: TVSdiodeDescription: Bourns TBU-CA The series TBU high-speed protector Bourns transient blocking unit (TBU) electronic current limiter (ECL) is a circuit protection device triggered by overvoltage or overcurrent, designed as the best circuit protection solution, and can be used in industrial control, medical electronic equipment, automation testing systems, as well as military and aerospace applications. They are low capacitance, unidirectional and bidirectional high-speed resettable devices that can protect against faults caused by short circuits, AC power intersections, inductance, and lightning surges within rated limits. Special features include a wide range of trigger currents and ultra fast overcurrent protection within a voltage range, as well as reduced external dimensions to save board space. This TBU can be used for protection on Ethernet, RS-485, HART, and other ports that may experience dangerous surges and power crossover events. It can also be used in telecommunications applications, providing a barrier against surges while allowing high-frequency signals (such as VDSL2) to pass through without damaging the circuit. For sensitive electronic applications, this TBU does not require large shunt protection devices and can prevent damaging currents from reaching the protected circuit in less than 1 millisecond. This TBU can significantly reduce the allowable energy and provide overshoot protection, thereby reducing stress on the printed circuit board to improve reliability and extend product life. Bourns TBU protection technology limits the energy allowed to enter sensitive electrons without loading capacitors onto high data rate lines. This allows designers to place high-performance protection even in the highest bandwidth applications. Advanced circuit protection, overcurrent and overvoltage protection block surge up to rated limits, high-speed performance, small SMT packaging, operating temperature range -40 ° C to+125 ° C, storage temperature range -65 ° C to+150 ° C, maximum contact temperature+125 ° C ESD: IEC 61000-4-428110+$8.5368100+$8.1100500+$7.82541000+$7.81122000+$7.75435000+$7.68317500+$7.626210000+$7.5978 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C ### note Maximum voltage shown is peak impulse voltage withstand with a duration of no more than 10ms. ### Recognized UL E315805 Surface Mount Technology (Fuse) Surface Mount Technology * * Resettable Fuse * * is used to prevent damage to electrical and electronic circuits caused by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications886710+$8.7996100+$8.3596500+$8.06631000+$8.05162000+$7.99305000+$7.91967500+$7.861010000+$7.8316 -
![]()
Category: TVSdiodeDescription: Bourns TBU-CX Series TBU High Speed Protector TBU-CX Series Bourns ® TBU ® The product includes low capacitance bidirectional high-speed protection components, constructed using MOSFET semiconductor technology, designed to protect against faults caused by short circuits, AC power cross-over, induction, and lightning strikes. TBU ® The high-speed protector is placed in the system circuit to monitor current and has MOSFET detection circuit triggering to provide an effective barrier, which can prevent sensitive electronic devices from being exposed to high voltage or current during surge events. TBU ® The equipment is provided in a surface mounted DFN package that meets industry standard requirements, such as lead-free soldering reflow range. Applications include voice/VDSL cards, protection modules and locks, process control equipment, testing and measurement equipment, and general electronics. Advanced circuit protection, overcurrent and overvoltage protection block surge up to rated limits, high-speed performance, small SMT packaging, operating temperature range -40 ° C to+125 ° C, storage temperature range -65 ° C to+150 ° C, maximum contact temperature+125 ° C ESD: IEC 61000-4-2 # # Recognized UL # # Surface mounting technology (fuse) # # Surface mounting technology * * Resettable fuse * * Used to prevent electrical and electronic circuits from being damaged by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications742110+$9.5928100+$9.1132500+$8.79341000+$8.77742000+$8.71355000+$8.63357500+$8.569610000+$8.5376 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C Maximum voltage shown is the peak impulse voltage wi37805+$15.279050+$14.6261200+$14.2604500+$14.16901000+$14.07762500+$13.97315000+$13.90787500+$13.8425 -
![]()
Category: TVSdiodeDescription: Bourns TBU-CA The series TBU high-speed protector Bourns transient blocking unit (TBU) electronic current limiter (ECL) is a circuit protection device triggered by overvoltage or overcurrent, designed as the best circuit protection solution, and can be used in industrial control, medical electronic equipment, automation testing systems, as well as military and aerospace applications. They are low capacitance, unidirectional and bidirectional high-speed resettable devices that can protect against faults caused by short circuits, AC power intersections, inductance, and lightning surges within rated limits. Special features include a wide range of trigger currents and ultra fast overcurrent protection within a voltage range, as well as reduced external dimensions to save board space. This TBU can be used for protection on Ethernet, RS-485, HART, and other ports that may experience dangerous surges and power crossover events. It can also be used in telecommunications applications, providing a barrier against surges while allowing high-frequency signals (such as VDSL2) to pass through without damaging the circuit. For sensitive electronic applications, this TBU does not require large shunt protection devices and can prevent damaging currents from reaching the protected circuit in less than 1 millisecond. This TBU can significantly reduce the allowable energy and provide overshoot protection, thereby reducing stress on the printed circuit board to improve reliability and extend product life. Bourns TBU protection technology limits the energy allowed to enter sensitive electrons without loading capacitors onto high data rate lines. This allows designers to place high-performance protection even in the highest bandwidth applications. Advanced circuit protection, overcurrent and overvoltage protection block surge up to rated limits, high-speed performance, small SMT packaging, operating temperature range -40 ° C to+125 ° C, storage temperature range -65 ° C to+150 ° C, maximum contact temperature+125 ° C ESD: IEC 61000-4-22365+$3.453325+$3.197550+$3.0184100+$2.9417500+$2.89052500+$2.82665000+$2.801010000+$2.7626 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C ### note Maximum voltage shown is peak impulse voltage withstand with a duration of no more than 10ms. ### Recognized UL E315805 Surface Mount Technology (Fuse) Surface Mount Technology * * Resettable Fuse * * is used to prevent damage to electrical and electronic circuits caused by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications300210+$6.4704100+$6.1469500+$5.93121000+$5.92042000+$5.87735000+$5.82347500+$5.780210000+$5.7587 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C ### note Maximum voltage shown is peak impulse voltage withstand with a duration of no more than 10ms. ### Recognized UL E315805 Surface Mount Technology (Fuse) Surface Mount Technology * * Resettable Fuse * * is used to prevent damage to electrical and electronic circuits caused by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications568210+$6.7320100+$6.3954500+$6.17101000+$6.15982000+$6.11495000+$6.05887500+$6.013910000+$5.9915 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C ### note Maximum voltage shown is peak impulse voltage withstand with a duration of no more than 10ms. ### Recognized UL E315805 Surface Mount Technology (Fuse) Surface Mount Technology * * Resettable Fuse * * is used to prevent damage to electrical and electronic circuits caused by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications128510+$8.7996100+$8.3596500+$8.06631000+$8.05162000+$7.99305000+$7.91967500+$7.861010000+$7.8316 -
![]()
Category: TVSdiodeDescription: Bourns TBU High Speed Circuit Protector, KE Series The TBU-KE series of Bourns TBU are low capacitance unidirectional high speed surge protectors designed to protect against faults caused by short circuits, induction and lightning surges and AC power cross.These TBU circuit protectors will trip in less than 1 μs when the current reaches the maximum value in one direction. The TBU KE series circuit protector blocks sudden surges in voltage or current and provides a barrier behind which electronics will not be exposed to damage. Post surge, the TBU device resets when the voltage across the TBU device falls to the Vreset level. Typical applications include Ethernet ports, protection modules, dongles and process control equipment. Superior circuit protection Overcurrent and overvoltage protection Blocks surges up to rated limits High speed performance Small SMT package Operating temperature range -40°C → +85°C ### note Maximum voltage shown is peak impulse voltage withstand with a duration of no more than 10ms. ### Recognized UL E315805 Surface Mount Technology (Fuse) Surface Mount Technology * * Resettable Fuse * * is used to prevent damage to electrical and electronic circuits caused by excessive current. They can quickly switch from a low impedance state to a very high impedance state under electrical overload or short circuit conditions, and can automatically reset and return to a low impedance state after the fault disappears and the power is cut off. After thousands of cycles of use, it is still a maintenance free automatic reset small model that does not require a fuse holder. It is mainly used for safety system power supply and transformer power switch devices, automotive and medical equipment instruments and control computers and peripheral devices, audio and video, and telecommunications610210+$8.7996100+$8.3596500+$8.06631000+$8.05162000+$7.99305000+$7.91967500+$7.861010000+$7.8316 -
![]()
Category: TVSdiodeDescription: Bourns TBU-CA The series TBU high-speed protector Bourns transient blocking unit (TBU) electronic current limiter (ECL) is a circuit protection device triggered by overvoltage or overcurrent, designed as the best circuit protection solution, and can be used in industrial control, medical electronic equipment, automation testing systems, as well as military and aerospace applications. They are low capacitance, unidirectional and bidirectional high-speed resettable devices that can protect against faults caused by short circuits, AC power intersections, inductance, and lightning surges within rated limits. Special features include a wide range of trigger currents and ultra fast overcurrent protection within a voltage range, as well as reduced external dimensions to save board space. This TBU can be used for protection on Ethernet, RS-485, HART, and other ports that may experience dangerous surges and power crossover events. It can also be used in telecommunications applications, providing a barrier against surges while allowing high-frequency signals (such as VDSL2) to pass through without damaging the circuit. For sensitive electronic applications, this TBU does not require large shunt protection devices and can prevent damaging currents from reaching the protected circuit in less than 1 millisecond. This TBU can significantly reduce the allowable energy and provide overshoot protection, thereby reducing stress on the printed circuit board to improve reliability and extend product life. Bourns TBU protection technology limits the energy allowed to enter sensitive electrons without loading capacitors onto high data rate lines. This allows designers to place high-performance protection even in the highest bandwidth applications. Advanced circuit protection, overcurrent and overvoltage protection block surge up to rated limits, high-speed performance, small SMT packaging, operating temperature range -40 ° C to+125 ° C, storage temperature range -65 ° C to+150 ° C, maximum contact temperature+125 ° C ESD: IEC 61000-4-23015+$3.453325+$3.197550+$3.0184100+$2.9417500+$2.89052500+$2.82665000+$2.801010000+$2.7626 -
![]()
Category: TVSdiodeDescription: BOURNS TBU-CA040-200-WH Surge protector, TBU-CA series, data cable, 400 V97495+$3.149625+$2.916350+$2.7529100+$2.6830500+$2.63632500+$2.57805000+$2.554610000+$2.5196 -
![]()
Category: MOSpipeDescription: 40V,136A,NChannel MOSFET187410+$9.3744100+$8.9057500+$8.59321000+$8.57762000+$8.51515000+$8.43707500+$8.374510000+$8.3432 -
![]()
Category: IGBTtransistorDescription: ON SEMICONDUCTOR NGTB10N60R2DT4G Single transistor, IGBT, 20 A, 1.7 V, 72 W, 600 V, TO-252, 3 pins87235+$5.945425+$5.505050+$5.1967100+$5.0646500+$4.97652500+$4.86645000+$4.822410000+$4.7563 -
![]()
Category: Bipolar transistorDescription: Bipolar pre bias/digital transistor, single PNP, -50 V, -500 mA, 10 kohm467720+$0.510350+$0.4725100+$0.4536300+$0.4385500+$0.42711000+$0.41965000+$0.412010000+$0.4045 -
![]()
Category: MOSpipeDescription: N Channel MDmesh ™ M5 series, STMicroelectronics MDmesh M5 power MOSFET optimized for high-power PFC and PWM topologies. The main features include low-pass loss per silicon area and low gate charge per silicon wafer area. They are designed for energy-efficient, compact, and reliable hard switching applications such as solar converters, consumer product power supplies, and electronic lighting controls. ###MOSFET transistor, STMicroelectronics71805+$21.850950+$20.9171200+$20.3942500+$20.26351000+$20.13272500+$19.98335000+$19.88997500+$19.7966 -
![]()
Category: Diode arrayDescription: Schottky diode and rectifier 10A 200V49835+$3.492525+$3.233850+$3.0527100+$2.9751500+$2.92332500+$2.85865000+$2.832810000+$2.7940 -
![]()
Category: Diode arrayDescription: Diode 45V 30A 3Pin(2+Tab) TO-263 T/R822510+$11.3196100+$10.7536500+$10.37631000+$10.35742000+$10.28205000+$10.18767500+$10.112210000+$10.0744 -
![]()
Category: Bipolar transistorDescription: 60V NPN SILICON PLANAR HIGH PERFORMANCE TRANSISTOR IN SOT22326305+$1.922425+$1.780050+$1.6803100+$1.6376500+$1.60912500+$1.57355000+$1.559310000+$1.5379 -
![]()
Category: Schottky diodeDescription: ROHM RB521S-30TE61 Small signal Schottky diode, single, 30 V, 200 mA, 500 mV, 1 A, 125 ° C841920+$0.117550+$0.1088100+$0.1044300+$0.1009500+$0.09831000+$0.09665000+$0.094810000+$0.0931 -
![]()
Category: TVSdiodeDescription: ESD Suppressor/TVS diode RECOMMENDED ALT 78-TA6F39AHM3_S/H78315+$1.981825+$1.835050+$1.7322100+$1.6882500+$1.65882500+$1.62215000+$1.607510000+$1.5854 -
![]()
Category: TVSdiodeDescription: Diode TVS Single Uni-Dir 30.8V 600W 2Pin DO-221AC Plastic T/R65615+$1.981825+$1.835050+$1.7322100+$1.6882500+$1.65882500+$1.62215000+$1.607510000+$1.5854
